Overview

Bambu Lab A1 Mini 3D Printer; Active Flow Rate Compensation; The A1 mini revolutionizes flow control in 3D printing. It utilizes a high-resolution, high-frequency eddy current sensor to measure the pressure in the nozzle. Our algorithm actively compensates the flow rate according to the readings to extrude with accuracy.; Full Auto Calibration; The A1 mini handles various calibrations all by itself. It meticulously calibrates the Z-offset, bed-level, vibration resonance and nozzle pressure for EVERY print job, automatically.; Plug-N-Play; The A1 mini comes to you pre-assembled, pre-squared, and pre-tuned with precision. It only takes about 20 minutes to set up for your first print.; Active Motor Noise Cancelling; The A1 mini can calibrate parameters to match tiny individual differences between each drive motor. This compensates for the unwanted harshness of motor noise.; Bed Slinger, with CoreXY Speed And Quality (High-Speed Precision); Full-metal Rails, rigid frame, nozzle pressure sensor, accelerometers, powerful MCU, and above all, an advanced motion control system that utilizes these features to print a 14-minute ‘Benchy’ with quality and following all the speed ‘Benchy’ rules straight out of the box without using specialized filaments.; Sync with Bambu Studio and Bambu Handy App; Remote control and monitor your printer on Bambu Studio or Bambu Handy. Through the built-in camera, you can also record timelapse videos.; Features:; Plug-N-Play; Active Flow Rate Compensation; Full Auto Calibration; Active Motor Noise Cancelling; High Speed Precision; Specifications:; Build Volume (WxDxH): 180×180×180 mm³; Hot-End: All-Metal; Max Hot-End Temperature: 300 °C; Nozzle Diameter: 0.4 mm (Included), 0.2 mm, 0.6 mm, 0.8 mm; Build Plate: Bambu Textured PEI Plate (Included), Bambu Smooth PEI Plate; Max Build Plate Temperature: 80°C; Max Speed of Tool Head: 500mm/s; Max Acceleration of Tool Head: 10000mm/s²; Monitoring Camera: Low Framerate Camera (Up to 1080P), Timelapse Supported; Filament Run Out Sensor: Yes; Filament Odometry: Yes; Power Loss Recover: Yes; Filament Tangle Sensor: Yes; A1 Mini: 347×315×365 mm³ , Package size : 385×430×460 mm³ , Net weight 5.5 kg , Gross weight 8.2 kg; Supported Filament:; Ideal: PLA, PETG, TPU, PVA; Not Recommended: ABS, ASA, PC, PA, PET, Carbon/Glass Fiber Reinforced Polymer